The following dependencies must be installed in order to run applications created with the Lisk SDK:
Mandatory: Always open the WebSocket port of your desired network, to enable communication with other peer nodes.
Optional: Open the corresponding HTTP port for your network in order to to ensure your node’s API is reachable.
To connect to the desired network with Lisk Core, please ensure that the corresponding ports shown below are open:
These ports can be altered later in the configuration file.
To install the required prerequisites, it is necessary to have a user with sudo rights on the server.
To run and manage a node in the future, please create a separate
Please execute the following command:
sudo adduser lisk
It is not mandatory to set up a
lisk user, especially when running a local instance for development purposes.
However, if it is required then it is recommended to create the user using the macOS GUI.
This is used for compiling dependencies.
To install PostgreSQL please follow the instructions described below.
|It is recommended to use PostgreSQL with Docker for a quick and straight forward setup of PostgreSQL, and also PostgreSQL system-wide for production environments.|
|Please see the instructions for the MacOS listed below.|
Firstly, install PostgreSQL on your machine by executing the following commands:
sudo apt-get purge -y postgres* (1) sudo sh -c 'echo "deb http://apt.postgresql.org/pub/repos/apt/ $(lsb_release -cs)-pgdg main" > /etc/apt/sources.list.d/pgdg.list' sudo apt install wget ca-certificates wget --quiet -O - https://www.postgresql.org/media/keys/ACCC4CF8.asc | sudo apt-key add - sudo apt update sudo apt install postgresql-10
|1||Remove all previously installed Postgres versions.|
After the installation is completed, it will be possible to see the PostgreSQL database cluster by running the following command:
Drop the existing database cluster as shown below, and replace it with a cluster with the locale
sudo pg_dropcluster --stop 10 main sudo pg_createcluster --locale en_US.UTF-8 --start 10 main
Create a new database user called
lisk and grant it access rights to create databases.
Then create the database with the
lisk user as the owner.
Finally, define the password for the
lisk user by executing the following commands below:
If the following error occurs:
sudo -u postgres -i createuser --createdb lisk sudo -u postgres -i createdb lisk_dev --owner lisk sudo -u postgres psql -d lisk_dev -c "alter user lisk with password 'password';"
Please change the
To install the PostgreSQL version 10 execute the following command below:
brew install postgresql@10
The next step is to execute the following commands in order to have the PostgreSQL commands (e.g.
psql), in your PATH:
echo 'export PATH="/usr/local/opt/postgresql@10/bin:$PATH"' >> ~/.bash_profile source ~/.bash_profile
Start the PostgreSQL, and create the
lisk user and the database by executing the following commands below:
pg_ctl -D /usr/local/var/postgresql@10 start createuser lisk createdb --owner=lisk lisk_dev psql --dbname=lisk_dev --command="ALTER USER lisk WITH PASSWORD 'password';"
Please change the
Running PostgreSQL inside a Docker container will set up the correct version of PostgreSQL and containerize it away from any existing versions that may be present locally on your machine. Please choose this set up if you are unfamiliar with PostgreSQL, or if problematic issues with a previously installed version of PostgreSQL have occurred.
Supported platforms: For further information please refer to the following link: Docker installation
To install Docker please refer to the applicable link listed below for your operating system:
Mac OS X
Please refer to Linux installation
Start the Docker container.
|If you have other versions of PostgreSQL installed on your machine, please ensure to stop them before starting the Docker container.|
docker run --name lisk_db -p 5432:5432 -e POSTGRES_USER=lisk -e POSTGRES_PASSWORD=password -e POSTGRES_DB=lisk_dev -d postgres:10
This will install PostgreSQL version 10 (
postgres:10) in a container with name
lisk_db and binds the port
5432 of the container with the same port of the machine.
As environment variables we expose
POSTGRES_USER=lisk to create the lisk user and
POSTGRES_PASSWORD=password to set the password for the lisk user.
Finally the environment variable
POSTGRES_DB creates the database
lisk_dev with the
lisk user as the owner.
The above should be enough to set up the database ready to use with the Lisk SDK. To manage the Docker container, use the following commands listed below:
docker stop lisk_db (1) docker start lisk_db (2) docker restart lisk_db (3) docker rm lisk_db (4)
|1||Stop the container.|
|2||Start the container.|
|3||Restart the container.|
|4||Remove the container.|
In order to access PostgreSQL inside the container via the CLI, please execute the following command:
docker exec --tty --interactive lisk_db psql -h localhost -U lisk -d postgres
Node.js serves as the underlying engine for code execution. There are several different ways and version managers to install Node.js on your system. Please ensure that the latest version is used. It is recommended to use one of the following two listed below:
Change to the
It is recommended to use a Node version manager, such as NVM. NVM is a bash script which enables the management of multiple active Node.js versions.
To install NVM, please follow these instructions.
Install the latest LTS version of Node.js:
nvm install 12.15.0
Alternatively, instead of using the NVM or other package managers, the node package can be installed globally by executing the following commands listed below:
curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash - sudo apt-get install -y nodejs
Please install firstname.lastname@example.org with brew. Now in order to complete the installation, execute the following command below:
brew install email@example.com echo 'export PATH="/usr/local/opt/node@10/bin:$PATH"' >> ~/.bashrc source ~/.bashrc
Install PM2 for managing the start/stop process of the application in the background by executing the following command:
npm install pm2 -g
To install the NPM package lisk-sdk, please execute the following command:
npm install firstname.lastname@example.org
After successful completion of all the above steps, the Lisk SDK and and all required dependencies should now be installed.